Effective from March 15, 2024, the Flamgard Plus will no longer be available.

The Xgard Bright series offers enhanced features and is a direct replacement for the Flamgard Plus.

A flameproof (Ex d) pellistor-based flammable gas detector with a display & 4-20mA output for hydrocarbon, hydrogen & petrol gas and vapour detection.

The Crowcon Flamgard Plus is a Flameproof (Exd) flammable gas detector which uses poison-resistant pellistors to detect explosive levels of hydrocarbons, hydrogen and other combustible gases and vapours, including aviation fuel and leaded petrol vapours.

Features

Non-intrusive calibration

• Calibration can be performed locally without hot work permits – minimising operational downtime.
• Local display and buttons enable calibration without opening the junction box.
• Magnetic wand supplied.

Flexible output options

• 4-20mA current sink or source – works with a wide selection of control panels.
• Three-wire format.
• Optional relays for alarm and fault – can be used for switching local alarms

Rugged and reliable

• Constructed using marine-grade aluminium with a stainless steel sensor housing – proven track record for operation in the harshest environments.
• Ingress protection to IP65 as standard.
• Flameproof (Ex d).

Low cost of ownership

• Non-intrusive one-person calibration – easy to operate and maintain.
• Long-life sensors – minimise interruptions to on-site activity.
• Simple parts replacement.

Range of sensors

• Choice of catalytic beads for a wide selection of flammable gases and vapours – this flammable, hydrocarbon and hydrogen gas detector can be tailored to your requirements.

Specifications

Specification	Details
Size	200 x 115 x 115mm (7.9 x 6.1 x 6.1 ins)
Weight	2.2 kg (4.9 lbs)
Ingress Protection	IP65
Enclosure Material	Junction box: Marine-grade alloy Sensor housing: 316 stainless steel
Power	10–30 Vdc, 210 mA max (relay version) 160 mA max (non-relay)
Cable Entries	2 x M20 or 1/2” NPT
Operating Temperature	-10°C to +55°C (-14°F to 131°F)
Humidity	0 to 99% RH non-condensing
Relays (Optional)	SPNO or SPNC contacts rated 30Vdc 1A (non-inductive load) for Alarm 1, Alarm 2, and fault
Display	3-digit LCD back-lit display, LED status indicator
Calibration Method	Via magnetically operated buttons
Electrical Output	Three-wire 4–20mA (sink or source)
Terminals	Suitable for up to 1.5 mm² cable
Sensor Type	Catalytic bead
Repeatability	± 2% FSD (typically)
Zero Drift	± 2% FSD (six months typically)
Response Time	T90 < 15 seconds (typically)
Performance	Tested in accordance with EN60079-29-1
Hazardous Area Zones	Zone 1 or 2
Approvals	Ex II 2 G Ex db IIC T6 Tamb -20°C to +55°C
EMC Compliance	EN 50270, FCC: CFR 47 Part 15, ICES-003