Crowcon Electrochemical Sensors

  1. Home
  2. Products

Crowcon Electrochemical Sensors

Crowcon Electrochemical sensors typically have a stated shelf life of six months from manufacture, provided they’re stored in ideal conditions at 20˚C. Inevitably, a small proportion of this period is taken up during the manufacture of the gas detector and in shipping to the customer.

We advise that when acquiring sensors and any spare parts during its lifetime, you plan and time your purchases for a minimal delay between storage and usage.

Lifespan when in use? In absolutely ideal conditions – stable temperature and humidity in the region of 20˚C and 60%RH with no incidence of contaminants – electrochemical sensors have been known to operate over 4000 days (11 years)! Frequent exposure to the target gas doesn’t limit the life of these tiny fuel cells: high-quality sensors have a large amount of catalyst material and robust conductors which don’t become depleted by the reaction.

However, ideal conditions don’t always exist or stay that way, so it’s vital to err on the side of caution when it comes to gas sensors.

With that in mind, electrochemical sensors for common gases (for example carbon monoxide or hydrogen sulphide) have a typical operational life of 2-3 years. A more exotic gas sensor, such as hydrogen fluoride, may have only 12-18 months.

Part Number Gas / Sensor Type Range / Details
E01976 Ammonia 0-100 ppm (Sensoric; -40°C min temp)
E01957 Ammonia 0-100 ppm (Sensoric SE; -20°C min)
E01967 Ammonia 0-1000 ppm (Sensoric SE; -20°C min)
E011050 Carbon Monoxide CO-BF Sensor
E01987 Chlorine Dioxide 0-1 ppm (Sensoric)
E01686 Chlorine Sensoric
E01231 Chlorine 7CLH Sensor
E01587 Ethylene Oxide 7BETO Sensor
E01234 Hydrogen Chloride 7BHL Sensor
E01616 Hydrogen Chloride Sensoric
E01237 Hydrogen Cyanide 7HCN Sensor
E01617 Hydrogen Cyanide Sensoric
E01687 Hydrogen Fluoride Sensoric
E01236 Hydrogen 0-2000 ppm (7HYT)
E01899 Hydrogen 0-100% LEL (H2 3E 4)
E01229 Hydrogen Sulphide 0-1000 ppm (7H)
E01446 Hydrogen Sulphide 0-50 ppm (7HH)
E011034 Hydrogen Sulphide 0-50 ppm (H2S-BH)
E011035 Hydrogen Sulphide 0-200 ppm (H2S-B1)
E01233 Nitric Oxide 7BNT Sensor
E011030 Nitric Oxide 3NT(G) with pins
E01230 Nitrogen Dioxide 7NDH Sensor
E01488/A Oxygen 7OX Sensor
E01503 Ozone 7OZ Sensor
E01620 Ozone O3 3E 1 Sensor
E01917 Phosgene Sensoric
E01585 Phosphine 7PH Sensor
E01383 Sulphur Dioxide 7SH Sensor
E01232 Sulphur Dioxide 7ST/F Sensor
E01586 Volatile Organics 7BVO Sensor

Note: Above sensors come with pins unless otherwise stated.

Enquire About This Product

Get in touch with us to see how we can help you with your project

Thank you Message Sent
Error occurred while sending email. Please try again later.